NXP Community

3,977 Members Online 218K Discussions 50.5K Solutions

Community Activity

	imx8mp router loopback, causing NETDEV WATCHDOG to reset and unable to restore the mac by yangrj Fresh Out Contributor in i.MX Processors 4 seconds ago 0 3	0	3
	Should auth_cntr provide a return value? by HH_Mov Contributor I in i.MX Processors 32 seconds ago 0 1	0	1
	AUTOSAR 4.4 MCAL Port Module configuration by jwjung Contributor II in S32K 9m ago 0 7	0	7
	Apply s32g274 bsp35.0 to add the PHY chip ADIN1200 in U-Boot by sdx111 Contributor II in S32G 9m ago 0 2	0	2
	How to debug wdog in imx-93 by leoX Contributor I in i.MX Processors 19m ago 0 24	0	24
	watchdog failed to trigger reboot with BSP44 image on RDB3 by hittzt Senior Contributor I in S32G 30m ago 0 2	0	2
	How to Retrieve Error Frame CAN ID and Payload in FlexCAN (S32G) by ventury Contributor I in S32G 30m ago 0 2	0	2
	EB29怎么都激活不了 by wuming123678987 Fresh Out Contributor in S32K 33m ago 0 1	0	1
	S32K312 with FreeRTOS can't run normally when the task use vTaskDelay() by AmyHuang666 Contributor II in S32K 42m ago 0 0	0	0
	Issue with RSA Intermediate Certificate Import using HSE by Anup97 Contributor II in S32G 50m ago 0 1	0	1