NXP Community

5,334 Members Online 218K Discussions 50.5K Solutions

Community Activity

	How can TJA1465 determine that the current wake-up cause is a specific frame wake-up by DVLY Contributor II in In Vehicle Networking 11m ago 0 0	0	0
	How to debug wdog in imx-93 by leoX Contributor I in i.MX Processors 29m ago 0 25	0	25
	屏幕分辨率的高度能不能设置100以下的？ by zhujianfeng Junior Contributor I in GUI Guider 38m ago 0 3	0	3
	imx8mp router loopback, causing NETDEV WATCHDOG to reset and unable to restore the mac by yangrj Fresh Out Contributor in i.MX Processors 46m ago 0 3	0	3
	Should auth_cntr provide a return value? by HH_Mov Contributor I in i.MX Processors 47m ago 0 1	0	1
	AUTOSAR 4.4 MCAL Port Module configuration by jwjung Contributor II in S32K 55m ago 0 7	0	7
	Apply s32g274 bsp35.0 to add the PHY chip ADIN1200 in U-Boot by sdx111 Contributor II in S32G 56m ago 0 2	0	2
	watchdog failed to trigger reboot with BSP44 image on RDB3 by hittzt Senior Contributor I in S32G an hour ago 0 2	0	2
	How to Retrieve Error Frame CAN ID and Payload in FlexCAN (S32G) by ventury Contributor I in S32G an hour ago 0 2	0	2
	EB29怎么都激活不了 by wuming123678987 Fresh Out Contributor in S32K an hour ago 0 1	0	1